Wednesday, May 20, 2015

SKY3DS Support CIA With Pasta CFW

Pasta cfw support installing unsigned CIAs on old and new 3ds below 9.2 with SKY3DS. Pasta requires ninjhax so the  CUBIC NINJA card or SKY3DS is essential. Sky3DS does basic 1:1 emulation of a retail flash cart and that's it.

How to set up Pasta cfw with SKY3DS?

Prepared, SKY3DS with CUBIC NINJA games, N3DS 9.0-9.2 and O3DS 4.1-4.5 / 8.0-8.1 / 9.0-9.2.


1. download pasta cfw zip files,  http://gbatemp.net/attachments/pasta-cfw-loader-0-1-3-zip.19089/
   download Ninjhax (http://smealum.net/ninjhax/dl/starter.zip)
  FBI ( https://github.com/Steveice10/FBI/releases)
2. unzip all 3 files and copy all of them to your root of system sd card and drag the DEVMENU CIA and ***cia on the same card.
3.Start CUBIC NINJA on your console, choose "Create", then "QR code", and finally "Scan QR code". as ninjhax instructions(select your console version and get the QR code)
4. press "A "launch the "Brahma''(pasta cfw has this file) then you can see the "arm9payload.bin" continue "A", then it goes to ask you choose the system firmware. You can press up down button to choose then "A". for a while it go to the main menu.
5. this step to install DEVMENU. Start CUBIC NINJA again as step 3, then go to FBI loader, press "A ". After that you can load
DEVMENU easily.
6. launch "Brahma'' once time then push "start "to main menu. All this done, DEVMENU gift pop out, pack it , you can install any your liked cias.

SKY3DS vs Gateway, which is better?

9.2 or lower version N3DS (9.2.0/9.1.0/9.0.0/8.1.0)
GW has cia support, sky3ds with pasta cfw can also do it
GW has multi-rom support , sky3ds switch games by button can also do it
GW has region-free support, sky3ds with NTR CFW can also do it
GW access eshop on sysNAND or emunand? sky3ds can access eshop freely with ntr cfw debugger on sysNand 
GW has online game support, sky3ds has too
GW should play 3ds game by hacking steps(need extra card to load exploit) , sky3ds work directly

- 9.2 or higher version N3DS
GW has no chance to support , sky3ds support directly and also region free on latest N3DS 9.7 with regionFOUR.


I personally think sky3ds has more advantages than GW , sky3ds has no support for the eshop titles or DLC, but has support of dsiware and gba vc with pasta cfw which gw did not support





Tuesday, May 5, 2015

How to Set Up Regionthree on SKY3DS for region Free?

Region free loader Regionthree allows 3DS/3DSXL/2DS on firmware versions 4.0 to 9.5.0-23 to play another region games. Sky3ds is not region free but Sky3ds works perfectly with Regionthree. So players can play any 3ds games whatever its region is with SKY3DS.

How to Use sky3ds card for region free?

Simply set up Smea’s regionthree, and write any other different region game on SKY3DS.

Firstly write the games by SKY3DS diskwriter into sd card.


  • Download Launcher.dat from https://github.com/smealum/regionthree/raw/master/Launcher.dat
  • Copy Launcher.dat to the root of your SD card (inserted side of console)
  • Insert the game  you want to run into your 3DS and power it up
  • Open the “Download Play” application
  • Hit the home menu button, but do not exit the Download Play application (keep it running in the background)
  • Open the Web Browser URL   Go to  http://www.go.gateway-3ds.com
  • Wait a few seconds; screen should turn black and after a bit your game should boot up !



Region Free Loader for All 3DS Firmware with SKY3DS

Currently RegionFOUR is released by Smealum, allowing region free for New3DS/New3DSXL/3DS/3DSXL/2DS  firmware versions 9.2 and 9.7.It requires that players have a copy of Cubic Ninja from your region in order to run RegionFOUR.
It is confirmed that SKY3DS works perfectly on  RegionFOUR and RegionTHREE.

What about 3ds firmware 9.3~9.6 for region free?

Yep, RegionFOUR the biggest breaking out New 3ds console and latest firmware 9.7. If your console version is not 9.2 or 9.7, you can still enjoy  region free by RegionTHREE. Region free loader RegionThree  for 3DS/3DSXL/2DS on firmware versions 4.0 to 9.5.0-23 this also allows you to bypass mandatory gamecard firmware updates.From that expect 3ds 9.6, we can play region games as we like to. We believe Smealum would add this firmware sooner or later.



Video  regionFOUR : (new) 3DS region free game loader on latest firmware




How to run RegionFOUR?

1. Go to the get regionFOUR section of this page and enter your console’s firmware version.
2. Hit submit; you should get your very own regionFOUR QR code.
4. Make sure your 3DS’s wifi connection is enabled and connected to the internet (this is important!).
5. Start CUBIC NINJA on your console, choose “Create”, then “QR code”, and finally “Scan QR code”.
6. Scan the QR Code. This step might take a couple tries; make sure you fill up as much of your 3DS’s screen with the QR code. If scanning the QR code returns to menu with an error, try a few more times.
7. Follow the on screen instructions. You may choose not to install the exploit to your gamecard’s savedata, though doing so is not recommended.
8. Once regionFOUR is ready, you will be prompted to insert your out-of-region gamecard. Simply remove the Cubic Ninja gamecard, insert your gamecard and press START.
9. OPTIONAL – once the regionFOUR is installed to your gamecard, just go back to the “QR code” menu and it’ll run automatically!